Skip to content
  • Home
  • Lamborghini, Ferrari & Maserati Services
  • About Me
  • Gallery
  • Contact
  • English
  • Español
  • Português
  • PPI República Dominicana
  • Dominican Republic PPI
November 17, 2026
craig-waterman.com

Exotic Automotive Technician

November 17, 2026
  • F1/E-Gear Clutches
    • F1 / E-Gear clutches: wear readings, friction materials, and the pitfalls that cost thousands.
    • PUNTO INCIPIENTE SLITTAMENTO (P.I.S.) – Understanding Clutch Engagement in F1/E-Gear Exotic Cars
    • Why Do I Need A Scan Tool After F1/E Gear Clutch Replacement
  • F1/E-Gear Systems
    • F1 and E Gear System Actuators
    • Tier-1 Approved E-GEAR & F1 Hydraulic Fluids: OEM History vs Modern Service Reality
    • Understanding E-Gear & F1 Transmission Failures: Calibration, Hydraulics, and Reality
    • E-Gear / F1 Actuator Potentiometers Explained: Selection vs Engagement (What the TCU Is Really Looking For)
    • Lamborghini E-Gear / Ferrari & Maserati F1 Potentiometer Testing (Gear vs Shift, Clocking, Centering)
    • How to Replace Magneti Marelli E-Gear / F1 Actuator Potentiometers (Position Sensors) Correctly
    • Hydraulic Hose and Solenoid Placement & Routing for F1 / E-Gear Shift Actuators
    • Maserati vs Lamborghini Actuators (and Why You Cannot Swap Them): The Pivot Geometry
    • “Self-Learning” Procedure for E-Gear and F1 Systems.
    • F1/E Gear Bleed Procedure (Is it necessary to have an OEM Level or Aftermarket Scan tool?)
    • F1 and E Gear Accumulators
    • F1/E Gear Pumps and Relays
  • Maserati
    • Maserati F1 Self-Learning: Why the Command Matters
    • How to Change a Clutch in a F1 Maserati
    • Maserati 4.2l Valve Cover Gasket Replacement
    • Maserati GranSport, Coupe, and Spyder Gear Box Oil Change.
    • Maserati GranSport/4200/3200 rear tie rods.
    • Maserati 4200/GranSport Window Micro-Switch and Regulator Fix
    • Maserati Rim Refinishing
  • E-Gear and F1 Actuator Rebuild Service
    • F1/E-gear Actuator Rebuild/Service
  • PPI Services
    • Buying & Owning a Pre-LP Lamborghini Gallardo: The Complete Checklist from an Exotic Tech
    • Ferrari, Lamborghini & Maserati Pre-Purchase Inspections

Search Field

Subscribe Now

Maserati F1 Self-Learning: Why the Command Matters

Maserati F1 self-learning warning for M139 and M145 Cambiocorsa systems, with an illustrative control unit.

When diagnosing an F1 transmission, knowing which calibration function you are selecting is just as important as knowing when to perform it. Similar-sounding scan-tool functions may not do the same thing.

Maserati issued a technical bulletin covering the Cambiocorsa-equipped M139 Quattroporte and M145 GranTurismo that contains an important warning for technicians and owners.

The factory warning

Maserati says not to perform the following command:

NCR → Active Diagnosis → Self Learning (All)

According to the bulletin, this particular command can permanently damage the NCR transmission control unit. Maserati separately specifies gear-structure self-learning as part of its procedure. The warning is not a blanket prohibition on learning the shift actuator’s gear positions.

The bulletin does not explain exactly what “Self Learning (All)” does internally or identify equivalent names used by aftermarket scan tools. Before running a similarly named function on a TEXA, Launch or other tool, verify what it commands for the vehicle and system being serviced.

What the F1 grid tells us

The bulletin’s F1 grid uses two separate gearbox actuator position readings:

  • Selection position relates to movement across the selector gates.
  • Engagement position relates to movement into or out of the selected gear.

The readings are compared with the stored minimum and maximum thresholds for each gear. Maserati also calls for cold and warm grids when investigating the example gear-engagement fault in the bulletin. Comparing conditions can provide useful information that a fault code alone cannot.

These gearbox engagement and selection readings are separate from the clutch-position measurement. “Gear engagement” in this grid should not be confused with the clutch’s engagement or kiss point.

Why the clutch baseline matters

Clutch wear percentage is a calculated value. It depends in part on the stored reference for a new clutch. If that reference is incorrect, the displayed percentage can be misleading.

Maserati explains that clutch configuration stores a new-clutch reference and says that operation should only be performed after a new clutch is installed. Resetting or reconfiguring values without understanding the procedure can make the diagnostic picture less reliable.

The takeaway

Save the readings, identify the exact transmission system, and verify the function before changing learned values. A scan-tool label, a single fault code or a wear percentage by itself should not be the whole diagnosis.

This article discusses the M139 and M145 Cambiocorsa systems identified in the bulletin. Procedures and terminology should be verified separately for other Maserati systems and Lamborghini applications.

Source: Maserati Technical Bulletin MAS002929 BOL 24-06

Download the guide

Download the Maserati F1 Cambiocorsa Self-Learning Guide (PDF)

Share this:

  • Tweet
  • Share on Reddit (Opens in new window) Reddit
  • Share on Telegram (Opens in new window) Telegram
  • Share on WhatsApp (Opens in new window) WhatsApp

Like this:

Like Loading…

Recent Posts

  • Lamborghini E-Gear / Ferrari & Maserati F1 Potentiometer Testing (Gear vs Shift, Clocking, Centering)
  • Tier-1 Approved E-GEAR & F1 Hydraulic Fluids: OEM History vs Modern Service Reality
  • How to Replace Magneti Marelli E-Gear / F1 Actuator Potentiometers (Position Sensors) Correctly
  • E-Gear / F1 Actuator Potentiometers Explained: Selection vs Engagement (What the TCU Is Really Looking For)
  • Maserati vs Lamborghini Actuators (and Why You Cannot Swap Them): The Pivot Geometry

Recent Comments

  • Exotic Car Pre-Purchase Inspections (PPI) | Ferrari, Lamborghini & Maserati Specialists on F1/E-gear Actuator Rebuild/Service
  • Understanding E-gear & Ferrari F1 Failures: Calibration Maps, Hydraulics & Fixes | Craig Waterman on E-Gear / F1 Actuator Potentiometers Explained: Selection vs Engagement (What the TCU Is Really Looking For)
  • Alan Miller on Ferrari, Lamborghini & Maserati Pre-Purchase Inspections
  • Exotic Car Pre-Purchase Inspections (PPI) | Ferrari, Lamborghini & Maserati Specialists on Buying & Owning a Pre-LP Lamborghini Gallardo: The Complete Checklist from an Exotic Tech
  • Poseidon on “Self-Learning” Procedure for E-Gear and F1 Systems.

Archives

  • February 2026
  • January 2026
  • May 2021
  • April 2021
  • December 2017
  • August 2017
  • September 2016
  • August 2016
  • July 2016
  • June 2016

Categories

  • Accumulator
  • Engine
  • Exterior
  • F1 and E Gear System
  • F1 and E Gear System Actuators
  • F1 Pumps and Relays
  • Interior
  • Lamborghini/Ferrari
  • Maserati
  • Maserati 4200/GS Ball Joint Gaiters/Dust Covers
  • Maserati Gearbox Fluid Change
  • Maserati GranSport/4200/3200 rear tie rods
  • Maserati Heater Core
  • Maserati Heater Core/Heater Hose Re-Route
  • Pre-Purchase Checklist
  • Wheel and Rims
  • Windows and Doors

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Archives

  • February 2026 (2)
  • January 2026 (6)
  • May 2021 (3)
  • April 2021 (1)
  • December 2017 (1)
  • August 2017 (1)
  • September 2016 (1)
  • August 2016 (1)
  • July 2016 (7)
  • June 2016 (3)

Contact Us

Craig Waterman

Oxford, Maine
Serving clients nationwide and worldwide.

Call: 781-402-4013
Text Craig
craigwaterman11@yahoo.com

WhatsApp Craig / Escribir por WhatsApp ↗

Copyright © 2026 craig-waterman.com. All rights reserved. | Theme: Blook By Themeinwp. | Powered by WordPress
%d